• 联系人:李经理
  • 手机:15006519345/18754165377
  • 网址:http://www.xlmygs.com
  • 地址:济南市金牛建材市场
新闻中心当前位置:首页-新闻动态
    简述各种类型的济南卷帘门维修技巧
    来源:http://www.xlmygs.com  日期:2019-03-13 14:26:45
    简述各种类型的济南卷帘门维修技巧
          Maintenance Skills of Various Kinds of Jinan Curtain Doors
          随着工业化水平不时提升,各种卷帘工业门在我们日常生活中被普遍的运用,卷帘工业门由活动多关节门片串联组合而成,适用于门洞较大的车库、厂房、商场等多种行业,而不同类型的卷帘门呈现毛病,我们又应该怎样针对地维修呢?
         With the improvement of industrialization level from time to time, various kinds of curtain industrial doors are widely used in our daily life. The curtain industrial doors are composed of movable multi-joint doors in series. They are suitable for garages, factories, shopping malls and other industries with large doors. However, different types of curtain doors show defects. How should we repair them in a targeted way?
    手动卷帘门
    Manual rolling shutter door
    当手动卷帘门呈现弹簧折断或是弹簧衔接带断裂时,能够改换弹簧吊带。另外若是卷帘门门锁打不开或是钥匙插不进去,能够改换工业门的门锁。假如卷帘门能够正常卷上去,卷帘门毛病缘由普通都是帘片卡子卡住导槽或是帘片变形所致,能够针对卷帘门入导槽的槽口处停止维修。
    When the manual rolling shutter door appears spring break or spring connection band break, the spring suspension band can be replaced. In addition, if the door lock of the rolling shutter can not be opened or the key can not be inserted, the door lock of the industrial door can be changed. If the curtain door can be rolled up normally, the cause of curtain door faults is usually caused by the curtain card stuck in the guide groove or the curtain deformation, which can stop the maintenance at the groove where the curtain door enters the guide groove.
    电子卷帘门
    Electronic curtain door
    在电子卷帘门维修时相比照较的复杂,卷帘门中的电路控制系统中包括:支配按键盒、远控器、以CPU为中心的控制主板、传感器等构成的检测控制电路等,因而对电子卷帘门的维修一定要找专业维修人员停止调整。电子卷帘门维修时需求留意理解分明卷帘门型号、损坏缘由、呈现的毛病现象,依据实践状况停止有效维修,才干愈加精确确实定下一步的检验办法和处置措施。
    Compared with the complex maintenance of electronic curtain doors, the circuit control system in the curtain doors includes: control keyboxes, remote controllers, CPU-centered control motherboard, sensors and other detection and control circuits. Therefore, the maintenance of electronic curtain doors must find professional maintenance personnel to stop adjusting. When repairing electronic curtain door, we need to pay attention to understand clearly the type of curtain door, the cause of damage, and the phenomenon of defects. We should stop effective maintenance according to the actual situation, so that we can more accurately determine the next inspection methods and disposal measures.
    快速卷帘门
    Fast shutter door
    在对快速卷帘门维修中,首先将中止按钮与控制正反转的按钮串联接好,将控制正反转和启动的两个按钮并联接好同时与停钮一端接好,另一端接电源,将快速卷帘门分别停止正转和反转,接触器常开辅助接点并联于对应启动按钮的两端。
    In the maintenance of fast shutter door, the stop button is connected in series with the control positive and negative buttons, the control positive and negative buttons and the start buttons are connected in parallel with one end of the stop button, and the other end is connected with the power supply. The fast shutter door is stopped positive and reverse respectively. The contactor usually opens auxiliary contact points and connects them to the two ends of the corresponding start button.
    留意事项
    Points for attention
    在对卷帘工业门维修时有一些需求留意的事项,在维系过程中操作人员不能擅自的分开操作点,以防发作事故。检查电器线路和电器设备能否损坏,假如遭到损坏要及时维修,以免呈现不用要的费事。
    In the maintenance of curtain industrial doors, there are some matters needing attention. In the maintenance process, operators can not unauthorized to separate operating points in order to prevent accidents. Check whether electrical wiring and equipment can be damaged, if damaged, timely maintenance, in order to avoid unnecessary trouble.