• 联系人:李经理
  • 手机:15006519345/18754165377
  • 网址:http://www.xlmygs.com
  • 地址:济南市金牛建材市场
新闻中心当前位置:首页-新闻动态
    电动卷帘门创造了生存的机会。
    来源:http://www.xlmygs.com  日期:2019-05-09 17:31:49
    济南兴隆门业有限公司是一家主要生产自动卷帘门、车库门的实力企业,长期以来,专业从事各种门窗的产品设计,并有一批技术人员从事生产制造,积累了丰富的经验,取得了很大的成果。在现场安装和售后维修方面,我厂有专业的人员为您服务。使其步步稳赢,赢得大家喜爱,创出一条光明之路。
    Jinan Xinglong Door Industry Co., Ltd. is a powerful enterprise which mainly produces automatic curtain doors and garage doors. For a long time, it specializes in the product design of various doors and windows, and has a number of technicians engaged in production and manufacturing. It has accumulated rich experience and achieved great results. In the field installation and after-sales maintenance, our factory has professional staff to serve you. Make it win steadily, win everyone's favor and create a bright road.
    我厂产品优势:卷帘门由铝合金帘片、铝合金导轨、卷帘门电机及钢管五金件配件组成77铝合金型材帘片双层结构更具牢固性 ;圆弧结构运行更顺畅;表面高温喷涂外表更美观。
    Our product advantages: the double-layer structure of 77 aluminium alloy profile curtain is made up of aluminium alloy curtain sheet, aluminium alloy guide rail, curtain door motor and steel pipe hardware fittings. The arc structure runs more smoothly and the surface of high temperature spraying is more beautiful.
    铝合金卷帘门配上卷帘门电机,整个门卷起来之后直径很小,假如2.5米高的门洞,直径只有24CM左右,而彩钢板卷帘门的直径会接近40CM左右,车库的高度由于政策限制,一般都不是很高,所以77铝合金型材卷帘门更适合车库门的安装。铝合金卷帘门的门板与导轨全部为铝合金材质,不会生锈,使用寿命超长,所以77铝合金型材卷帘门更适合卷帘门的安装。

    Aluminum alloy rolling shutter door is equipped with rolling shutter motor, the diameter of the whole door is very small after rolling up. If the door is 2.5 meters high, the diameter is only about 24CM, while the diameter of color steel rolling shutter door will be close to 40CM, the height of garage is generally not very high due to policy restrictions, so 77 aluminum alloy rolling shutter door is more suitable for garage door installation. The door panels and guideways of aluminium alloy rolling shutter doors are all made of aluminium alloy. They are not rusty and have long service life. Therefore, 77 aluminium alloy rolling shutter doors are more suitable for the installation of rolling shutter doors.

                                        济南卷帘门厂

    卷帘门的安装方法:
    Installation method of rolling shutter door:
    一、先在需要安装的门框框口位置画出线。表明尺寸大小,然后找盈科安盾工作人员设计出合适的卷帘门,这里值得注意的一点是框内高度比门扇的高度要一点点。
    First, draw the line at the door frame mouth which needs to be installed. Indicate the size, and then find the staff of PICC Anshield to design a suitable rolling shutter door. Here it is worth noting that the height inside the frame is slightly higher than the height of the door fan.
    二、先把卷帘门的门框固定,这里要先拆掉门框下部的固定板。注意:洞口两侧地面要预留凹槽,经校正合格后,固定木楔,门框铁脚与预埋铁板件焊牢。用水泥砂浆或强度不低于10MPa 细石混凝土嵌塞牢固即可。
    2. Fix the door frame of the rolling shutter door first, and remove the fixed plate at the lower part of the door frame first. Note: Grooves should be reserved on the ground on both sides of the entrance. After being calibrated and qualified, wood wedges should be fixed, and the iron foot of the door frame should be welded firmly with the embedded iron sheet. Cement mortar or fine stone concrete with strength not less than 10 MPa can be firmly embedded.
    三、安装卷帘门扇主体门扇。一定要保证卷帘门与墙体结成整体,封闭性要做好,再粉刷洞口及墙体。粉刷完毕后,门缝应均匀平整,开启卷帘门应该自由轻便,不得有过紧、过松和反弹现象.
    3. Install the main door fan of the rolling shutter door. We must ensure that the curtain door and the wall become a whole, the closure should be done well, and then paint the hole and the wall. After finishing painting, the door seam should be even and smooth, and the rolling shutter door should be open freely and lightly, without any tightness, looseness and rebound.